CellAdvisor Cable and Antenna Analysers provide integrated solutions for line sweep measurement, RF / optical power measurements, and fibre inspection, in a lightweight, cloud-enabled instrument ideal for cell site installation.
The majority of problems in wireless networks occur at the base station infrastructure, composed of the antenna system, cables, and connectors, and they are typically related to the cable feed-line (coax or fiber). Contamination in fibre connectors is the most common problem associated with Fibre. All wireless networks with fibre based feed-lines require the verification of both RF and Fibre. Until now multiple instruments were used for these tests, one for RF and another for fibre, and the JD720C series cable and antenna analyser is the first cable and antenna analyser that provides an integrated solution for fibre and coax, being the most versatile and optimal instrument to properly service and install cell sites.
Model | Frequency GHz | RF test 1-port 2-port | FO test | Test Wizards | Cloud services | |
JD723C | 0.1-2.7 | x | - | x | x | x |
JD724C | 0,05 - 4 | x | - | x | x | x |
JD725C | 0,05 - 4 | x | x | x | x | x |
JD726C | 0,05 - 6 | x | x | x | x | x |
Basestation Analyzer | Signal Analyzer | RF Analyzer | Cable Antenna Testers | |
Spectrum Analysis | JD745B 100kHz-4GHz JD785B 9kHz-8GHz | JD748B 100kHz-4GHz JD788B 9kHz-8GHz | JD746B 100kHz-4GHz JD786B 9kHz-8GHz | No |
Cable Antenna Analyzis | JD745B 5MHz-4GHz JD745B 5MHz-6GHz | No | JD746B 5MHz-4GHz JD786B 5MHz-6GHz | Yes |
Insertion Gain/Loss | Optional | Optional | Optional | Depends on model |
RFoCPRI | Optional | Optional | Optional | No |
RFoOBSAI | Optional | Optional | Optional | No |
Interference Analyzis | Optional | Optional | Optional | No |
Signal Analyzis | Optional | Optional | No | No |
PIM Detection | Yes | Yes | Yes | No |
T1/E1 Analyzis | Optional | No | No | No |
DAS Testing | Yes | Yes | No | No |
Bluetooth | Optional | Optional | Optional | Optional |
RF Power | JD745B 10MHz-4GHz JD745B 10MHz-8GHz | JD748B 10MHz-4GHz JD788B 10MHz-8GHz | JD746B 10MHz-4GHz JD786B 10MHz-8GHz | Yes |
Optical Power | Yes | Yes | Yes | Yes |
Fiber Inspection | Yes | Yes | Yes | Yes |
Cloud Services | Optional | Optional | Optional | Optional |
VIAVI CellAdvisor 5G is the industry’s most easy-to-use, innovative, and comprehensive base station analyser. It is the ideal field-portable solution to validate and deploy 5G radio access networks. Its combination of real-time spectrum analysis and 5G beam analysis, as well as the ability to test fibre, coax, and air interfaces, makes it one of the most versatile cell site test solutions available. Whether you are performing signal analysis, interference analysis, or just inspecting fibre connections, this one instrument can do it all. Its easy-to-use interface, complemented by cloud-enabled VIAVI StrataSync, makes it simple to create reports and close projects fast.
Benefits:
Applications:
Key Features:
InterferenceAdvisor
Identifying and rectifying interference issues in a mobile environment is a challenging but critical task. Mobile users near the interference source will experience degraded call success rates, increased dropped calls, decreased battery life, poor voice quality, and reduced data throughput. Detecting, locating, and finally eliminating sources of RF interference is critical to maintaining good user experience throughout the network.
VIAVI InterferenceAdvisor™, our fully automated interference hunting solution, is the most user-friendly solution available today. Simple to set up and completely intuitive, InterferenceAdvisor allows one RF engineer to easily identify and locate an interference source with minimal effort: voice prompts simply direct the engineer to the source of interference. What used to take days to troubleshoot can now be done in hours by following a few simple steps.
InterferenceAdvisor is versatile tool that can help in isolating all types of RF interference for common cellular channels.
Highlights:
Benefits: