Fujikura Fusion Splicer Accessories for Field Splicing
Fujikura fusion splicer accessories keep the splicing workflow complete, serviceable and ready for field use. The accessory range covers fibre holders, batteries, AC and DC power options, work trays, J-plates, tripod mounts, carrying cases, cleaver parts, electrodes, cleaning tools and preparation kits. These items are not only spare parts; they affect how the technician handles fibres, powers the splicer, protects the equipment and maintains repeatable splice quality over time.
Correct accessory selection depends on the splicer generation, fibre format, cable type and working environment. A 90R ribbon workflow needs different holders, V-grooves and tray support than a compact 45S or 35S single-fiber field kit. Older platforms may also require different batteries, cords, electrodes or carrying solutions. Astrec helps match Fujikura accessories to the splicer model, field workflow and service requirement.
Accessories that keep splicing work controlled
Fujikura fusion splicer accessories support the practical details around the splice: fibre positioning, power supply, workspace setup, cleaver maintenance and cleaning. The right accessory set reduces improvisation in the field and helps technicians keep the same workflow across different sites and splicer models.
Correct fibre positioning
Fibre holders, set plates and clamps keep the cable or fibre format stable before stripping, cleaving and fusion splicing.
Reliable field power
Batteries, chargers, adapters and power cords keep splicers usable in cabinets, outdoor sites and mobile service work.
Practical work setup
Work trays, J-plates, straps, tripods and carrying cases make field splicing more organised and repeatable.
Serviceable equipment
Electrodes, cleaver blades, clamp arms and cleaning kits help maintain splice quality and reduce avoidable downtime.
Fujikura accessory groups by workflow
The accessory list is best understood by function, not by part number. A complete field setup usually combines fibre handling, power, workspace, wear parts and cleaning items according to the splicer model and the type of fibre work.
Fibre holders and clamps
Fibre holders and sheath clamps adapt the splicer workflow to different fibre and cable formats. The list includes holders for 160 µm, 200 µm, 250 µm, 500 µm and 900 µm coatings, drop cable, indoor wire cable, 2 mm and 3 mm cord, ribbon fibres and splice-on-connector work. This group is critical because incorrect holding can affect preparation accuracy before the splice.
Power and battery accessories
Battery packs, battery chargers, AC adapters, AC power cords and DC power cords keep Fujikura splicers usable across workshop, vehicle and field conditions. Different splicer generations use different battery families, charger types and regional power cords. This category is especially important for service teams that maintain older and newer Fujikura platforms in parallel.
Work trays and field setup
Work trays, J-plates, tripod screws, straps and carrying cases make the splicing area more stable and organised. These accessories are useful when the technician works in cabinets, manholes, shelters, poleside situations or temporary field locations. They do not change the splicer’s core performance, but they can strongly affect handling quality and workflow consistency.
Maintenance and wear parts
Electrodes, cleaver blades, clamp arms, fibre dust boxes, V-groove parts and cleaning kits belong to the serviceable side of the workflow. These parts matter when splice quality starts to drift, cleave quality becomes inconsistent or equipment needs preventive maintenance. Keeping the correct wear parts available helps avoid unnecessary downtime and emergency sourcing.
Core Fujikura fusion splicer accessories
These accessory categories cover the main support areas around Fujikura fusion splicers: fibre handling, power, workspace, cleaver maintenance, electrodes and cleaning. Selection should follow the splicer model and actual field workflow.
Fibre holders
Fibre holders are used to position the fibre or cable format correctly before splicing. Fujikura holder options cover standard coated fibres, loose buffer cable, drop wire, indoor wire, 2 mm and 3 mm cord, ribbon fibres and pitch-conversion ribbon work. This category is one of the most important accessory groups because the holder must match both fibre format and splicer workflow.
Typical examples include FH-70 holders for 160–900 µm coating diameters, FH-60 holders for drop or indoor wire cable, FH-FC holders for cord-type cables and FH-70 ribbon holders for 2 to 16-fiber ribbon work. Ribbon applications may also require holders for 200–210 µm spacing or pitch conversion from 200 µm to 250 µm.
Batteries and power parts
Power accessories include Li-ion battery packs, battery chargers, AC adapters, AC power cords and DC power cords. These parts keep the splicer usable in both workshop and field conditions. The correct selection depends strongly on the splicer generation, because 100 series, 90/68 series, 45/35 series and older platforms use different battery and adapter combinations.
Examples include BTR-19 for 100 series, BTR-15 for 90/68 series, BTR-17 for 45S/35S and BTR-11A for 31/41/51 series. Regional AC cords and vehicle DC cords are also part of this group. For field teams, power accessories are not optional extras; they define how long the kit can operate away from mains power.
Work trays and J-plates
Work trays, J-plates, tripod screws and straps help organise the physical splicing area around the machine. They support cable routing, fibre handling and stable positioning of accessories during field work. This is especially relevant in cabinets, access nodes and temporary workspaces where the splicer cannot always be placed on a clean bench.
The list includes work trays for 100 and 90 series splicers, J-plates with and without fibre clamps, tripod screws for splicers and cleavers, carrying case straps and fusion splicer straps. These parts are often model-specific, so they should be selected according to the exact splicer series and field setup.
Cleaver parts
Cleaver accessories include fibre setting plates, clamp arms, blades, dust boxes, carrying cases, spacers and side covers. These parts keep the cleaver serviceable and adapted to the fibre format being prepared. They are relevant for CT16, CT60, CT50, CT08, CT30 and older Fujikura cleaver generations.
Typical examples include AD-16A and AD-16B for CT16, AD-60A and AD-60B for CT60, CB-09 blade for CT16, CB-10 blade for CT60 and FDB dust boxes for fibre scrap collection. Correct cleaver accessories matter because cleave quality depends on the blade, clamp condition, fibre positioning and clean scrap handling.
Electrodes
Electrodes are regular wear parts in fusion splicers and must match the splicer family. They are directly linked to arc stability and splice consistency, so they should be replaced according to the service condition of the machine. Keeping the correct electrode set available helps avoid downtime during planned maintenance or field repair.
The accessory list includes electrode sets for 100 series, 90/68/51/45/41/35/31 series, 70/80/62/60/50 series and older platforms. Electrode selection should be checked against the exact splicer model, because similar-looking parts can belong to different generations. For fleet maintenance, electrode stock is one of the simplest ways to reduce avoidable service delays.
Cleaning and preparation kits
Cleaning and preparation accessories support the steps around stripping, cleaving and splicer maintenance. This group includes alcohol pots, dispensers, V-groove cleaning kits, fibre preparation toolkits, brushes, loose tube cutters and general field tool sets. These items help reduce contamination and make field preparation more consistent.
Examples include AP-02 alcohol pots, HR-2 alcohol dispenser, VCK-01 V-groove cleaning kit, STK-04 fibre preparation toolkit, LTC-01 loose tube cutter and FUJI-KIT-06 field tool kit. These accessories are not substitutes for correct splicer maintenance, but they help technicians keep the preparation area, holders and V-grooves in better condition.
Keeping Fujikura splicer fleets ready for field work?
Choose the right Fujikura fusion splicer accessories for the splicer model, fibre type and field workflow. Astrec can help identify compatible holders, batteries, electrodes, cleaver parts, cleaning kits and worksite accessories for current and older Fujikura platforms.